Dynaudio Xeo 6 Owner's Manual download pdf (Page 25)

Connecting and establishing a link

Hub Extender

1. Connect the Power socket to the voltage supply via the Xeo power supply unit.

Do not use a different power supply unit!

2. Select the same ID on the Hub and Extender for the Hub Id In.

E.g. Hub: Id = B → Extender: Hub Id In = B.

3. Select any (other) ID on the Extender for the Extender Id Out.

It may not be identical to the Hub Id In.

E.g. Extender Id Out = C

NOTES:

Two Extenders may also be used in a sequence.

Select e.g. the following ID settings:

• Hub: Id = A → Extender 1: Hub Id In = A, Extender Id Out = B → Extender 2: Hub Id In = B,

Extender Id Out = C

Only one Extender may be deployed if using two Hubs.

Select e.g. the following ID settings:

• Hub 1: Id = A

• Hub 2: Id = B → Extender: Hub Id In = B, Extender Id Out = C

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Dynaudio Xeo 6 Owner's Manual Page 25