Dynaudio IP 17 Specifications download pdf (Page 6)

4 Dynaudio Owners Manual

Unpacking

1. Fold the top carton flaps back and carefully remove the contents. We suggest that

you keep the entire packaging and all contents until the installation is complete.

2. Check the contents; see next page.

3. Remove the speaker from the plastic bag.

IP series only:

4. Carefully remove the grille by lifting both ends of the red foil at the same time.

5. Un-tighten the screws:

– IP 17: 6 screws, Torx 20 bit

– IP 24: 10 screws, Torx 20 bit

Place the screws into the accessory pack for later use.

6. Remove the baffle from the frame and, to avoid damage, keep them in the supplied

plastic bag (and preferably in the carton) away from the work area until they are ready

to be mounted.

 Also reference the chapter “Installation” on page 10.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Dynaudio IP 17 Specifications Page 6