18 Dynaudio
Xeo loudspeakers
The active Xeo 4 and Xeo 6 loudspeakers have an integrated amplier and can be controlled with
the Xeo remote control. The loudspeakers can be switched between stereo and mono mode using a
switch on the rear.
Connections and control elements
Speaker
position
Sound adjustment (depending on the position of the loudspeakers)
• Neutral = with free-standing placement
• Wall = if placed near a wall
• Corner = if placed in a corner
Loudspeaker placement
• Left = left loudspeaker for stereo mode
• Mono = if only using one loudspeaker
• Right = right speaker for stereo mode
Speaker ID/
zone
Selection of audio zones
Loudspeakers assigned to different zones can be controlled separately via the
remote control. The zones are identied as Red, Green, and Blue.
Power Power switch
• I = The loudspeaker is on. The loudspeaker can be activated and deactivated via
the remote control. If the loudspeaker is activated and there is no signal, it will
switch to standby mode.
• O = The loudspeaker is completely off.
Mains socket
To connect the loudspeaker to the mains voltage.
Comments to this Manuals