Dynaudio Xeo 6 Owner's Manual download pdf (Page 20)

20 Dynaudio

Cloth cover

The cloth cover has been designed so it does not inuence the sound dispersion of the loudspeaker.

The cloth cover is attached to the housing with magnets and may be removed if needed.

Setting up

CAUTION

Spikes with pointed ends

Xeo 6 oor-standing speakers are delivered with spikes for permanent installation on the

oor. The pointed ends of the spikes may result in injuries and damage delicate oors.

► Pay attention that you do not injure yourself with the spikes.

► We recommend inserting the spikes in aluminum feet if you have delicate oors, such as parquet

or laminate.

► Position the loudspeaker in the desired location.

– Do not expose the loudspeakers to direct sunlight, heat, or moisture.

– Do not place the loudspeakers near devices with strong electromagnetic radiation or devices

that could be destroyed or damaged by magnetic elds.

Connecting and adjusting

1. Use the power cable to connect the loudspeaker to the mains voltage and switch it on using the

power switch on the rear.

2. In stereo mode:

– Select Left operating mode for the left loudspeaker.

– Select Right operating mode for the right loudspeaker.

In mono: Select Mono operating mode.

3. Select the Red, Green, or Blue zone. In stereo, select the same zone for the right and left

loudspeakers. Loudspeakers with different zone settings can be controlled separately via the

remote control.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

No comments

Dynaudio Xeo 6 Owner's Manual Page 20